ABOUT THE PRODUCT

Haus HT is a monolithic zirconia, it is best recommended for posterior restorations. 

It has a 1200 MPa with a 42% translucency. Due to its opaqueness, we recommend this material to be used for dark stump shades, over abutment posterior cases and  non esthetic restorations. 

Haus HT can be milled as single units or up to 16 unit bridges!

Related the products

• Full Crown

• Coping

• Cut-back Crown 

• Full Arch

• Angulated SRC 

TI-BASE TYPE AND SIZE

Click the link below to view a table of Ti-base types and sizes. 

Shipping Policy

Haus Dental Design & Milling Center is dedicated to offering excellent customer service. Please read our shipping policy, and be sure to contact us if you have any questions whatsoever.

We use the following carriers to deliver our orders:

If a tracking number is provided by the shipping carrier, we will update your order with the tracking information. 

The rate charged for shipping your order is based on the weight of your products, and on your location. Before reaching the final checkout page, you will be shown what the cost of shipping will be, and you will have the opportunity to not place your order if you decide to terminate your transaction and cancel your order. 

Refund and Cancellation Policy

All orders are custom made to the customer's specifications. Once production is started or completed your order cannot be canceled.

Cancellation

Any request to cancel a case that has been sent in for production needs to be requested by a written email. Any case cancellation will incur charges for the portion or entirety of the case that has undergone manufacturing.

Any case accepted for cancellation will be issued a Haus Gift Card to be applied on future purchases. As we do not issue refunds to the original form of payment, an in-store credit will be issued.

Other

Haus Milling retains the right to refuse service to any customer who does not agree to the above policies.

In the event a customer cancels an order, the customer agrees to pay Haus Milling Center for all costs and expenses incurred by Haus Milling Center in connection with the day on which Haus Milling Center receives the cancellation notice.

Repairs, Re-Stains & Adjustments

• Repairs are free of charge.

• Adjusting contacts is free of charge.

• Changes or additions to cases will result in additional charges.

• Re-shading that is different from the original lab slip and requires stripping and new application will incur an additional charge.

• Additionally, repair cases that are being sent to our office will not be provided a shipping label. 

• A Shipping method will also need to be chosen by the customer and paid for, for the return of the repair from our office.

Returnable Products

• Product received is different from the product ordered online.
• Product or material is clearly defective or milled in the wrong shade/material and cannot be used.

Once your return has been received and inspection has been completed, we will send an email informing you that we have received the returned item.

Our team members will contact you to discuss the return process further.

If you have completed the steps mentioned above, but have not received a correction, please email us (info@hausmilling.com)

Return Shipping

Product must be shipped to the address below:

Haus Milling Center

2835 Virgo Ln Dallas, TX 75229

We do not provide return shipping labels. Shipping charges are non-refundable. If you receive a refund, the return shipping fee will be deducted from the refund.

The arrival time of the exchanged product may vary depending on the shipping method you choose.

If you ship a product valued more than $75.00, please consider using a traceable delivery service or purchasing shipping insurance.

We do not guarantee that we will receive your returned goods.

Haus FAQ

For questions, suggestions, or inquiries please get in touch with us! (Click)

General Questions

1. Where are you located?

2835 Virgo Ln Dallas, TX 75229

2. Do you provide shipping labels for models/impressions to be sent to your milling center? 

No, all of our customers must mail their cases at their expense.

3. Are you products made in the USA?

Yes, we are proud to fabricate our products at our Dallas Texas Facility.

4. Do you ship internationally?

We offer shipment to Canada and Mexico at this time.

5. What glazing paste do you recommend?

We recommend using Miyo stain and glaze.

Cut Off Time

1. What is the cut off time for STL’s? 

3:00 PM CST

2. What is the cut off time for Intra-Oral Scans?

11:00 AM CST

3. What is the cut off time for Lab Scans?

11:00 AM CST

4. What is the cut off time for Models?

11:00 AM CST

My Account

1. What is my order number?

In your account page, you will see all of your order numbers.

Click on the order number to get an invoice, right-click and then click print to able to print the your invoice.

2. Can I change or update my address ?

Yes, in your account page you will find 'view address'. Click the edit button your address book entries.

3. How to get started?

You can get started by clicking the human icon in the upper right corner of the our website or Click here.

If you are not our member yet, you can click the 'Create account' button to become a member.

Members of the Haus Milling Center can receive A FREE CROWN COUPON worth $22 every Monday in the morning via email.

How to submit design files

1. How to submit designed STL files? 

Click to view

2. How to submit Models/Impressions?

Click to view

3. How to submit Intra-Oral_Scan files? 

Click to view